✉   JAFU Agricultural MachineryMowing & spraying equipmentCompare models · Contact JAFU

JAFU / Equipment

S120D

S120D sprayer catalogue illustration

Earlier catalogue reference retained at its original URL. The current 20261117 JAFU catalogue is a separate source version; no hardware equivalence is asserted.

S120D is a remote-controlled sprayer.

Describe the spraying task

Include the crop or site, canopy, row spacing, access width and ground conditions. Describe the intended spraying task and arrangements for filling, cleaning and transport.

Configuration and operation

Confirm the configuration for your model and version: tank, pump, nozzle arrangement, engine version, flow and pressure information. Review access requirements, operating controls and maintenance documents against the task.

Parts and documentation

For parts, identify the machine, component and component position. Confirm the operating, maintenance and parts information applicable to the exact model version.

Is tank size enough to select a sprayer?

Compare the proposed pump and nozzle configuration, coverage requirements, crop and site conditions as well as tank information. Ask how the proposed setup would be assessed for the intended task.

S120D is a remote-controlled sprayer identified in the supplied JAFU catalogue. Use that model reference when discussing a spraying configuration. Tank information alone cannot establish coverage, output or suitability for a crop and site.

Define the spraying task

Describe the crop or site, canopy height and density, row spacing, access width and ground conditions. Explain the intended task and the arrangements for filling, cleaning and transport. Keep these inputs separate from any proposed machine specification: they describe the requirement, not a confirmed capability.

Review the proposed setup

Identify the version and confirm the tank, pump, nozzle arrangement, engine version, flow and pressure information applicable to it. Review access, operating controls, supervision and the required maintenance information. Missing values remain unconfirmed; this introduction supplies no numerical capacity, pressure, coverage, work-rate or operating-limit promise.

Confirm the model image and version

The available S120D image is a catalogue reference. It does not show a clean, complete upper pole. Confirm the complete machine's appearance and components for the proposed S120D version. An image of another sprayer does not confirm S120D components.

Documentation and replacement parts

Identify the machine, component and component position when making a parts request. Confirm the document and part version before relying on it. An operating procedure, chemical-application recommendation or maintenance specification cannot be inferred from this product photograph.

Questions before selection

Does the current image show a clean, complete upper pole?

No. The available S120D catalogue image does not show a clean, complete upper pole. Confirm the appearance and components of the proposed version with S120D-specific information.

Can another sprayer's image confirm S120D component details?

No. A different model's picture cannot confirm S120D component details. Use information attributable to the proposed S120D version.

Discuss S120D

Use the existing contact route with the model, crop/site brief, proposed version if known, and configuration questions. The present private preview saves local test information only and does not send external email.

Catalogue specifications and configuration reference

Source: JAFU spraying equipment catalogue v11 (Chinese), physical page 5, S120D. The entries below describe the model sheet. Confirm the exact version and configuration offered in a quotation. Nominal entries are not independent test results, operating instructions or performance guarantees.

Spraying arrangement

  • Spraying-arrangement entries: pole-type plus air-assisted arrangements. Identify which arrangement is proposed; the label is not a universal coverage promise.
  • Nozzle entry: six, with a configurable/customisable marker in the catalogue. Confirm the offered nozzle arrangement; the entry is neither a universal fixed count nor a promise that every custom option is available.
  • Pump type: three-cylinder plunger pump. This describes a pump type, not three separate pumps or a repair procedure.
  • Catalogue pressure-range entry: 2.0–4.5 MPa. This is not a chemical/nozzle-selection recommendation or an operating instruction.
  • Air-duct diameter entry: 45 cm. It does not establish an airflow or crop-coverage result.

Chassis reference

  • Track-width entry: 10 cm on this S120D page.
  • Chassis-width entry: 52 cm. Chassis width is not the complete operating envelope.
  • Machine-mass entry: 190 kg. The entry does not identify loaded/dry mass or the mass of a particular offered variant.

Named engine variants

  • Petrol-version entry: 隆鑫170, 4.4 kW / 6 hp as listed. This row belongs to the petrol version; 170 is not a stated displacement.
  • Diesel-version entry: 常发173, 4.0 kW / 5.5 hp as listed. Keep it separate from the petrol entry and confirm the version offered.

Packing reference

  • Wooden-crate size entry: 165 × 77 × 107 cm. This is not machine height or evidence of the deployed-pole arrangement.
  • Wooden-crate mass entry: 60 kg. This is not total shipping mass.

Power description

  • The page describes an engine driving a generator. That description can be retained; its separate unlimited-endurance wording does not establish a runtime guarantee.

Points to confirm for the offered version

The tank row uses a mass unit under a volume label; a capacity in litres is not established. The size entry does not identify the pole position or complete deployed height. Clarify the pump-flow and water-use conditions separately, and confirm the proposed engine/nozzle arrangement and applicable instructions.

Prepare a S120D purchasing record

Keep the task requirements and the proposed S120D version in the same record. Use your own site information for the requirement column, and an attributable model-specific document for every machine value. This keeps a requested result separate from a confirmed configuration.

Crop and task

  • Information to prepare: Crop, canopy, row layout and intended spraying requirement
  • How to use it: Define the requirement before comparing a proposed setup.

Access and handling

  • Information to prepare: Usable row clearance, turns, refill/cleaning locations and transport route
  • How to use it: Compare the complete operating envelope with version-specific information.

Spraying configuration

  • Information to prepare: Model/version and the tank, pump and nozzle questions to resolve
  • How to use it: Do not select from a tank reference or catalogue scene alone.

Operation and documents

  • Information to prepare: Applicable instructions, controls, supervision and operating limits
  • How to use it: A model or Auto label does not establish unattended operation.

Parts and source reference

  • Information to prepare: Machine/component identity and the document/image reference
  • How to use it: Confirm exact-version compatibility; similar appearance is insufficient.

Keep unresolved configuration fields as questions in the enquiry. Retain the source title, page or revision beside each reply so that a later quotation can be checked against the same requirement.

Ask about S120D ↗

EmailWhatsApp

Contact JAFU

Chat on WhatsApp